DOVER (THYSSENKRUPP) Rota |
Cylinder Head Packing |
|
|
Cylinder Head Identification
|
PLUNGER SIZE |
PACKING SET |
PACKING SEAL *
(1 required) |
STEEL SPACER |
| 3-1/2" (3S) |
3EA023-11** |
4E002 |
- |
| 4-3/8" (4S) |
9EA023-12 |
9E091 |
- |
| 5-7/16" (5S) |
9EA023-13 |
9E092 |
- |
| 6-1/2" (6S) |
9EA023-14 |
9E093 |
- |
| 7-1/2" (7S) |
- |
4E014 |
- |
| Two Seal Unit *** |
| 4-3/8" (4S) |
9EA023-12 |
9E091 |
1S212 |
| 5-7/16" (5S) |
9EA023-13 |
9E092 |
1S213 |
| 6-1/2" (6S) |
9EA023-14 |
9E093 |
1S214 |
* Replacement seal no longer includes O-Ring - included only in complete set.
** O-Ring not available.
*** Use Packing Set and Steel Spacer. Do not use two Rota Seals in tandem. Do not use standard 1/2" cross section seal below Rota Seal as this may result in excessive friction.
Manufactured until January 2005. After 2005 see Thyssenkrupp Rota U-Cup.
Older units use babbitted bearing. Newer units use split plastic wear ring which is available on request.
May require gasket on older units manufactured before mid 80's, available on request. |
Solid Packing Set
Optional
|
|
|
|
