Click for HOME Click for CONTENTS Click for INDEX Click for SEARCH Click for ORDER FORM Click for INFO blue95.gif (868 bytes)

line.gif (880 bytes)



  Wire Rope “No-Go” Gauge, a tool that every inspector and mechanic should have. No need for expensive calipers, our gauge will not break, and does not require re-calibration. Accurate, durable, lightweight and easy to use!!.

Manufactured to ASME A17.1-1996 1001.2(C)(29)(C) specifications of 2011. T3 anodized aluminum with numerals acid etched on.

The easy, no-hassle, foolproof way to check elevator wire rope for maximum reduced diameter. No guess work, no mistakes, the gauge contact area of rope is from one lay to several strands, depending on rope diameter. Gauge stays parallel to rope, so you are always checking from the top of one strand to the top of the opposite strand for maximum reduced diameter. If rope fits into slot, it should be replaced.

Model WRG-2000
• 3/8”, 1/2”, 9/16”, and 5/8” wire rope diameter
• Anodized red finish

Model WRGM
• 8mm, 10mm, 11mm, and 13mm wire rope diameter
• Anodized blue finish


wrg-2000.jpg (14692 bytes) wrgm

logo.jpg (29232 bytes)

line.gif (880 bytes)