|
|
|
Plug-in or integral tank heater, thermostat is set for 100° F, has 275W, 120V, and
60Hz. IN STOCK. |
|
Model TH120P
Quick, Plug-in installation. Hard wiring not required. Custom made for your specific
applications (Advise: “A” Dimension required not to exceed 48” maximum).
•15' long plug-in cord
•115 VAC, 275 Watt, 2.3 Amps
•100ºF thermostat
NOTE: See
worksheet for installation specs and size requirements. |
|
|
Model TH120
Permanently mounted so turbulence will
not move heater in tank. Custom made for
your specific applications (Advise: “A”
Dimension required not to exceed 48”
maximum). **NOTE: See worksheet for
installation specs and size requirements.
Model TH120F
• Same heating element with flex cord
• 1 standard length, 40”
Option: Model THO
• 20 amp red on/off switch with cover
|
 
Model TH120
Model TH120F
|
|
TANK HEATER WORKSHEET
Recommended Installation
1. Locate heater if possible at bottom of tank or with minimum of 4” of oil cover.
2. Make all knock outs and holes above high oil mark in tank.
3. Mount standard switch and cover in utility box if required for summer - winter
operation (not furnished, optional).
|
|
|
Model TH120M
• Ideal for residential and small commercial units
• Mounts outside tank
• Attach to side of tank and plug in
(6 foot long power cord)
•Power supply 110 VAC, 200 watt output
|
|
|
|
|
